Pace count
Your pace count is how many paces you take in 100 meters. A pace is two steps: count each time your left foot lands. Go To uses it to turn the distance to a mark into paces.
Until you set it, the count is 65 per 100 m.
Measure it
Section titled “Measure it”-
Open Tools ▸ Pace count, outside, with a good fix and a straight stretch ahead.
-
Tap Start. The large number is how far you are from where you started.
-
Walk in a straight line at your normal stride, counting each time your left foot lands.
-
Stop when the screen reads That is 100 m. Stop and enter your count. The phone taps once.
-
Set Paces counted to your number with the stepper.
-
Tap Use 65 per 100 m (with your own number in it). The tool closes and the count is saved.
Start Again takes your current position as a new start.
The distance is the straight line from the start to where you are, so a curved walk measures short. The save button appears once you have covered 50 m, and scales your count to 100 m if you stopped short or went long. The saved count is kept between 40 and 120.
Set it by hand
Section titled “Set it by hand”Settings ▸ Pace count is a stepper from 40 to 120 per 100 m.
What changes it
Section titled “What changes it”On a slope, in brush or with a pack the count rises. Measure it on ground like the ground you will walk.

