Skip to content

Grid, magnetic and true north

An azimuth is an angle measured clockwise from north, and there are three norths. Mixing them up is the classic mistake. Geo Marker says which north every azimuth is from, wherever it shows one.

  • True north is the pole.
  • Grid north is straight up the map’s grid lines. A protractor on a gridded map reads grid north.
  • Magnetic north is where a compass needle points. A hand compass reads magnetic north.

Two angles connect them, and both depend on where you stand. Position shows them at the bottom (the Declination and grid convergence panel), and so does the converter tool.

Angle Is Where it comes from
Declination How far east or west of true north magnetic north lies. The phone’s own compass: the difference between its true and its magnetic heading. It is kept from the last time the compass ran.
Grid convergence How far east or west of true north grid north points. Worked out from your position in your grid zone. It is zero on the zone’s central meridian and grows toward the zone’s edges.

Both read E or W. Where a value is not known the app shows a dash.

A grid azimuth belongs to the grid zone you stand in. The same direction reads differently on the other side of a zone edge.

Settings ▸ Azimuths from sets the north for every azimuth in the app: Grid north (the standard choice), Magnetic north or True north.

  • Working from a gridded paper map with a protractor: Grid north.
  • Walking on the numbers with a hand compass and no conversion: Magnetic north.

Every azimuth is followed by its north: grid, magnetic or true. If the north you chose cannot be had, the app falls back to true north and says true:

  • Grid north needs a UTM grid. There is none beyond 84° north and 80° south.
  • Magnetic north needs the declination. The phone learns it the first time its compass runs with a position. Open Position or Go To and hold the phone flat for a moment.

The Heading card on Position follows the same setting.

Settings ▸ Angles in switches between Degrees and Mils (6400): 6400 mils to the full circle. Azimuths are written with three digits in degrees (056°) and as a whole number in mils. The Heading card shows the other unit in its small line.

The tool Grid, magnetic, true reads one azimuth from each of the three norths.

  1. Open Tools ▸ Grid, magnetic, true.
  2. Type the azimuth, in degrees.
  3. Choose the north it is from: grid, magnetic or true.
  4. Read the three lines: Grid north, Magnetic north and True north, each in degrees to a tenth and in mils. The north you typed in is highlighted.

Under the lines the tool shows the Declination and Grid convergence it used.

  • If the phone does not know the declination yet, a field Declination, east + appears. Type the value from your map’s margin: east as a positive number, west as a negative one.
  • Without a position the grid line shows a dash: Grid north needs your position: the angle between grid and true north depends on where you are.